Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved. Performing this step yields 12.5 feet times 8.33 feet times 0.42 feet or 43.7 cubic feet.
How do you calculate asphalt tonnage?
- Step 1: Measure your pathway.
- Step 2: Convert the measurements to feet.
- Step 3: Multiply the measurements to cubic feet.
- Step 4: Multiply the weight density of asphalt with the volume figure.
- Step 5: Covert the amount to tons.
How is tonnage calculated?
tonnage, in shipping, the total number of tons registered or carried or the total carrying capacity. Gross tonnage is calculated from the formula GT = K1V, where V is the volume of a ship’s enclosed spaces in cubic metres and K1 is a constant calculated by K1 = 0.2 + 0.02 log10 V.
What is the formula for asphalt?
https://www.youtube.com/embed/cyKeNF-iIX0
How do you calculate unit weight of asphalt?
Multiply Volume by the Density
To determine how much asphalt you will need for the project, multiply the area’s cubic feet measurement by 148 PCF. For example, if the area is 40 cubic feet, then the formula is: 40 cubic feet x 148 PCF = 5,920 pounds of asphalt mix.
How do I calculate an asphalt driveway?
For example, a 10′ wide x 20′ long driveway with a depth of 3″ would be 50 cubic feet. To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
What is the weight of asphalt?
Concrete and asphalt weights are based on the square footage and thickness of the material. On average, a cubic yard of solid concrete weighs 4,050 pounds (~2 tons), or 150 pounds per cubic foot. Solid asphalt weighs slightly less at 3,960 pounds per cubic yard.
What is tonnage measurement?
‘Tonnage’ broadly is a measure of a ship’s size which can be expressed in terms of either volume or weight. The word ‘ton’ originates from the French ‘tonneau’, or English ‘tun’, which in the 13th century was a large wine cask of volume about 252 gallons, i.e. about 40 cubic feet, and weight about 2240 lbs.
What is tonnage factor?
The tonnage factor provides the mechanism for the conversion from volume of ore to weight of ore. In the English system, the tonnage factor is normally expressed as cubic feet per ton of ore. In the metric system, the tonnage factor is the specific gravity of the ore.
What do you mean by tonnage?
Tonnage is a measure of the cargo-carrying capacity of a ship, and is commonly used to assess fees on commercial shipping. The term derives from the taxation paid on tuns or casks of wine. In modern maritime usage, tonnage specifically refers to a calculation of the volume or cargo volume of a ship.
How many tonnes are in a cubic Metre of asphalt?
Asphalt – 2.5 tonnes/m3.
How many square meters is a ton of asphalt?
One ton of asphalt covers:
2” or 50.8 mm thick = 24 SqM.
How do you convert tons to SF?
- Multiply the length of the area by the width of the area = Square Feet.
- Multiply Square Feet by the Depth* = Cubic Feet.
- Divide Cubic Feet by 27 = Cubic Yards.
- Multiply Cubic Yards by 1.5 = Tons Needed.
What is the unit of asphalt?
Generally, Asphalt is in tons or in cubic yard, tons, cubic meter or in cubic foot. Furthermore, for Asphalt computation, it is needed to keep the unit weight or density of compacted Asphalt from laboratory side or architect (designer).
How many tons of asphalt are in a dump truck?
limit. Super Dumps are capable of hauling payloads from 19 to 26 tons, if you can properly distribute the loads to each axle. A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
How wide is a typical driveway?
How Wide Are Residential Driveways? Primarily, most professionals recommend that you install a 10 feet to 12 feet wide driveway. The standard driveway width for an SUV or conventional pickup truck is 10 feet. Anything less than 10′ wide will likely present difficulties for drivers, even in smaller vehicles.
How do you convert asphalt to tons?
Divide by 9 square feet per square yard to get 630 square yards of pavement area. Multiply 630 SY x 0.057 T/SY/inch to get 35.91 tons per inch of asphalt. We will round up to 36 tons. So if you are paving 3 inches deep during the original construction, that’s 3 x 36 = 108 tons.
What is the cost of 1 ton of asphalt?
Asphalt cost per ton
Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet.
How do I calculate how much asphalt I need?
Estimate the volume of asphalt needed, using geometrical formulas and plans or measurements, including width, length, and depth (thickness). Estimate the density of the hotmix to be used. Standard density for asphalt is 145 lb/ft3 (2322 kg/m3). Multiply the volume by the density (in the same units) to get the weight.
What is the difference between gross tonnage and gross registered tonnage?
Gross tonnage is calculated based on the moulded volume of all enclosed spaces of the ship and is used to determine things such as a ship’s manning regulations, safety rules, registration fees, and port dues, whereas the older gross register tonnage is a measure of the volume of only certain enclosed spaces.
What is a grade tonnage curve?
A grade tonnage curve combines two or three equations together to produce one of the more important tools for analysing the data indicating the potential amount of material obtained when varying the cut-off grade applied. Leapfrog Geo can display multiple grade tonnage curves on one graph.
How do you calculate your grade ore?
The average grade of each hole is the sum of the products of each sample length by its assay value divided by the sum of the lengths. This grade, multiplied by the volume of the prism and divided by the volume-per-ton factor, gives the tons- percent or ton-dollars in the prism, as the case may be.
What is assay value?
i. The quantity of an ore’s valuable constituents, determined by multiplying its assay grade or percentage of valuable constituents by its dimensions. The figure for precious metals is generally given in troy ounces per ton of ore, or per assay ton.
Is tonnage the same as tons?
ton | |
---|---|
SI derived unit | 907.18474 kg (short) |
Is tonnage a volume or weight?
Ton, as a unit of volume, may also refer to the cargo capacity of ships or to the freight itself. The register ton is defined as 100 cubic feet, the freight or measurement ton as 40 cubic feet; an older measure of a ship’s displacement was based on the volume of a long ton of seawater, or 35 cubic feet.
https://youtube.com/watch?v=MuyU_Z6PNBs
What is a cubic meter in tonnes?
Cubic meters | Metric tons (or tonnes) |
---|---|
1 m³ | 0.984 t |
2 m³ | 1.968 t |
3 m³ | 2.952 t |
4 m³ | 3.936 t |
How many yards is 14 tons?
6 cubic yards of gravel = 1.4 ×6 = 8.4 tons, 7 cubic yards of gravel = 1.4 ×7 = 9.8 tons, 8 cubic yards of gravel = 1.4 ×8 = 11.2 tons, 9 cubic yards of gravel = 1.4 ×9 = 12.6 tons and 10 cubic yards of gravel = 1.4 ×10 = 14 tons.
What are 3 types of asphalt?
There are three main types of asphalt: Hot Asphalt, MC Cold Mix, and UPM. There are also different varieties of these asphalts for summer and winter use.
Is asphalt a bitumen?
Bitumen is actually the liquid binder that holds asphalt together. The term bitumen is often mistakenly used to describe asphalt. … Asphalt is produced in a plant that heats, dries and mixes aggregate, bitumen and sand into a composite mix.
What Colour is asphalt?
Asphalt is typically black in colour. This is because the binder that is mixed with the chosen aggregates, bitumen, is a viscous black liquid. However, asphalt surface courses can also be produced in a range of colour variations. This is achieved by adding coloured pigment in the mixing process.