You do need a slip solution or 70% alcohol to work with the gel. Great starter pack. This photo was taken two weeks after I applied the polygel nails. They do not pop off if your application is on point.
What can you use instead of slip solution for Polygel?
Rubbing Alcohol – Alcohol is the main ingredient in slip solution so you can easily use most forms of alcohol as a substitute. A Gel Base Coat – is transparent and has a watery consistency which means that it can act as a substitute for your slip solution.
What liquid do you use with Polygel?
The liquid used to sculpt PolyGel is called Slip — the name was inspired by the slip potters use when working with clay. Slip is not a monomer; it has no active ingredients, and unlike acrylic monomer, it has a light, pleasant fragrance. It’s simply used to make the PolyGel easy to shape.
Can I use hydrogen peroxide as a slip solution?
Both 99-percent isopropyl alcohol and hydrogen peroxide are good substitutes for nail polish remover. Just soak your nails in warm water, dab a cottonball with either the alcohol or the peroxide and apply to your nails.
Can I use monomer as slip solution?
What is slip solution for Polygel nails used for?
A slip solution is any moisturizing, oil-based product that can reduce the tension of acrylics on natural nails. A slip solution for polygel use after curing the base coat, while the nail is still tacky. It helps reduce adhesion of the product on the nail plate and makes the polygel easier to remove.
What is slip solution ingredients?
Ingredients. Isopropyl Alcohol, Isobutyl Acetate, Acetone, Acrylates Copolymer, Fragrance (Parfum), Benzyl Alcohol, Benzyl Benzoate, Benzyl Salicylate, Butylphenyl Methylpropional, Citronellol, Geraniol, Hexyl Cinnamal, Hydroxycitronellal, Linalool, Violet 2 (CI 60725)
Can I use alcohol on PolyGel?
You can definitely use rubbing alcohol for Polygel nails as long as it’s 70% or above. The Polygel slip solution is concentrated and so a high percentage of alcohol is necessary to compare to the Polygel slip solution. Most rubbing alcohol is 60% to 99% so it’s perfect!
How do you get Polygel to stick to your nails?
What do you need for Polygel nails?
You will need the Polygel solution, a metal tool to apply it, a precision brush to smooth it, and a slip solution to prevent the Polygel from sticking to your nail tools. The solution also needs to harden using an LED or UV lamp, and you should apply a finishing coat.
Can I use gel base coat for Polygel?
Answer: You can absolutely use either gel or traditional polish over top of PolyGel. However, we are not that sure if it would be better than the base coat. So somehow we still recommend the base coat as designed and better results.
Do you need monomer for Polygel?
Plus, they are thick and sturdy with less breakage to the natural nail, explains Aaron. To apply, an acrylic powder called monomer must be used. … Because of this, Polygel nails are less likely to break off. Plus, as Lim points out, Polygel is easier to apply—it doesn’t require the tedious mixing of powder.
Can you use vodka for Polygel nails?
Yes!! Try a low % alcohol around 40-60% much higher and some polygels will develop a little chaulky look. Or you can use gel basecoat.
Why does my Polygel keep lifting?
If your poly gel nail is popping from the back, then it’s due to the lack of nail prep or improper application. Make sure your nails are free of water and oil. However, it’s possible that you simply have super soft nails. If it’s popping from the free edge, perhaps you have super soft nails.
How do you make a slip solution?
Why is my Polygel not drying?
One reason is if the product has been applied too thick. The light not only drys the product but hardens it . If the product is applied too thick it can’t dry and harden as it should. (Make sure the product you are using isn’t too old.
Why does my Polygel not cure?
This is a result of the white pigment not allowing the UV light to penetrate too deeply into the gel. … If the gel is still liquid, it was applied too thick and the UV light did not penetrate through the thickness of the gel to get it to cure completely.
Why do my Polygel nails break easily?
When the layer is super thick LED-light can not go through the product and it will stay soft in the middle. Such a nail can easily break. If you want to make long nails with a white free edge split the process into 2-3 steps.
Do you need primer and dehydrator for Polygel nails?
You should always have a primer. Primer is an important step in completing a proper set of acrylic nails. You don’t need both a bonder and a dehydrator, but you definitely need one. We definitely recommend PH Plus over dehydrator because it promotes adhesion a better than Dehydrators.
Can I use top coat as base coat for PolyGel?
A base coat can be used as a top coat and a top coat can be used as a base coat. But you wouldn’t get the same level of performance as if you used the correct coat. And in some cases using the wrong coat can actually make your manicure less durable and more prone to peeling and chipping.
Do you need a dehydrator for PolyGel nails?
The purpose of dehydrator is to strip the nail of ALL oils because otherwise the polygel doesn’t stick. Also when you use the primer, only use a tiny little bit and give it a few minutes to dry before putting on the product.
What can I use if I don’t have liquid monomer?
- Polyester Resin. Polyester resin is similar in chemical composition but not exactly the same, and most people don’t have it on hand. …
- Rubbing Alcohol. …
- Dip Powder Activator. …
- Use the Dip Nail Powder Method instead of Monomer. …
- Press on Nails instead of Monomer.
Is Polygel supposed to be sticky after curing?
The sticky residue that is left on the nail after curing is caused from the oxygen in the air near the upper layer of gel that doesn’t let the oligomers link together to cure properly which results in that sticky layer of uncured gel. It’s just a matter of oxygen. For example, when you apply ONE layer of gel, cure it.
Why are my Polygel nails sticky?
There is a sticky later after curing the polygel. Please remove it by wiping the surface of the nail with isopropyl alcohol.