Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang. If weight is a concern, consider ultra-light half-inch drywall.
What is the true thickness of 1/2 drywall?
Drywall is sold in several standard thicknesses: 1/4-inch (6.35mm) 3/8-inch (9.52mm) 1/2-inch (12.7mm)
How thick is modern drywall?
Most modern homes have ½-inch thickness drywall sheets. It is suitable for wood and steel frames.
How thick are interior walls with drywall?
1/2-Inch-Thick Drywall
Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings.
How can I tell how thick my drywall is?
https://www.youtube.com/embed/XecYxT5l3gw
How thick is garage drywall?
For the majority of your garage, you can use standard 1/2 inch drywall. For the ceiling and wall abutting the house (if this is an attached garage), you should use 5/8-inch sheetrock or type X fire-rated drywall. Always check your local building codes. There is a code for everything, and your drywall is no exception.
How thick is an interior wall?
A two-by-four wall stud is 3 ½ inches wide, and an interior wall typically has ½-inch drywall installed on both sides, bringing the wall thickness to 4 ½ inches. Walls that contain plumbing, such as walls behind sinks, however, should be thicker than standard walls.
What size drywall do I need?
The most common thicknesses for general application are 3/8 inch and 1/2 inch. However, several decades ago, 1/2 inch became the industry standard. Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall.
How thick is a stud?
Studs are vertical boards — they are generally 2 x 4’s, although they actually measure 1 1/2 inches thick and 3 1/2 wide — and are installed at intervals inside a wall to strengthen it and support the wallboard, paneling or plaster.
How far apart are studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
How thick should residential walls be?
The standard wall thickness for a residential house for 2×4 studs is 4-1/2 inches wide, including a 1/2 inch drywall on both sides. You should use 2×6 studs on walls with plumbing, which will bring the thickness to 6-1/2 inches, including the 1/2 inch drywall on both sides.
How thick should wall be?
As far as standard building materials are concerned, masonry walls tend to be the thickest, and the maximum recommended thickness for walls up to 70 feet high is 12 inches. Add an extra 4 inches for each additional 70 feet in height. Any thickness greater than this, no matter the material, is excessive.
How thin can interior walls be?
A typical residential wall consists of a floor plate, two ceiling plates, wall studs, and 1/2 inch drywall to form a wall that’s 4 1/2 inches thick. A narrow wall is 2 to 2 1/2 inches thick, but it is not suitable as a load bearing wall and local building codes might not allow it between bedrooms.
How is wall thickness measured?
https://www.youtube.com/embed/EP4ynwgg4fo
Can you use drywall in an unheated garage?
Short answer is yes, you can drywall an unheated garage. The problem won’t come from the heat but the humidity, which causes moisture, which causes rot and mold. Even though unheated, ventilation and a dehumidifier may be necessary depending on where you live.
How thick should bathroom drywall be?
Drywall is a mediocre spec for bathroom walls. It can be used where it will not be regularly exposed to liquid water or persistent moisture. In these cases MR board is recommended. For thickness 1/2″ (12mm) is generally sufficient but 5/8″ (15mm) is better.
What size drywall do I need for garage?
The most common drywall panel size measures 4 feet by 8 feet, and if the garage walls are 8 foot high, that’s the optimal size. If the garage walls are 9 feet high, select panels that are 54 inches wide. When installed horizontally, the panels will fit evenly, eliminating the need to cut the panels.
Is 4 inch wall enough?
A 4.5-inch thick brick wall is provided for partition walls only and should not be more than 7 feet in height. Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.
How thick are interior and exterior walls?
In the US and Canada a typical residential interior wall with 2×4 construction is 3 1/2” stud and 1/2” drywall on either side would be 4 1/2” thick . A residential exterior 2×6 wall would be 6 1/2” thick not including siding .
How thick should outside walls be?
The minimum thickness of an exterior wall would be the sum of a 2×4 (3 1/2 inches), sheetrock (1/2 inch) and exterior finish. Stucco with screen is 1/2 to 3/4 inches thick. So, 4 to 4 1/4 inches is the minimum.
Which is better drywall or Sheetrock?
No, there is no difference between Sheetrock and drywall. Sheetrock would likely be the standard for what drywall should be. If you see in a tutorial that you should use Sheetrock, you can use any type of drywall available to you. Whether the drywall will be as high quality as Sheetrock is a different question.
Does thicker drywall help with sound?
So, here’s how thick walls should be to be soundproof: A standard stud wall built properly, and consisting of 2 sheets of drywall with an air cavity 5 to 6 inches thick, is good enough to make the wall soundproof. A concrete wall would have to be around a foot thick to be completely soundproof.
What size screw should I use for 1/2 drywall?
Choosing the right drywall screw
Most common — 1-1/4”: Use 1-1/4” drywall screws to secure 1/2 drywall installed on wood-stud walls. These coarse-thread screws typically feature phosphate coatings, which better protect against rust compared to zinc coatings.
How deep are studs behind drywall?
They are 4 inches deep, under the drywall (2×4). If you can’t find the stud with a finder, locate the stud by measuring off at 18 inch increments from a corner.
How thick is a framed wall?
Typical interior walls are framed with 2x4s. This makes walls about 4-1/2 inches thick (3-1/2 inches of wood covered on both sides by 1/2-inch-thick drywall).
How thick is 2×4 wall?
Most wall assemblies, especially those in older homes, are built with two-by-four (2×4) studs. Since modern two-by-fours are not 4 inches, the true depth of the wall cavity is 3 1/2 inches.
Can I use my iPhone as a stud finder?
The iPhone beeps when its magnetometer, in the upper right of the phone, is near metal. Stud Find is an iPhone application that uses the device’s built-in magnetometer to find metal studs, screws, nails and anything metallic in a wall.
How do I find a stud with a flashlight?
- Turn off the lights in the room.
- Aim your flashlight at a steep angle against the wall so the light beam spreads across the wall.
- Look for small dimples in the wall, which indicates a drywall screw.
How far are studs from corner?
When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you start in a corner and measure out 16 inches and you don’t find a stud, you should find one at 24 inches.
How thick should stud walls be?
How thick is a stud wall? Timber stud walls are usually just over 5 inches in thickness. This includes the combined thickness of your studs (either 70 or 100mm), two plasterboard sheets (each 12.5mm in thickness) and the skim plaster finishes.
What is the thinnest possible wall?
A narrow wall is 2 to 2 1/2 inches thick, but it is not suitable as a load-bearing wall and local building codes might not allow it between bedrooms. Narrow walls are sometimes found in master suites, separating bath and closet areas within a larger master bedroom.
How thick should a partition wall be?
The most common thicknesses for the timbers in a timber-frame partition wall are: 100mm x 50mm. 75mm x 50mm. Custom thicknesses can also be considered.
How thick should a half wall be?
A little more research indicates that half walls should be between 36 and 48 inches. If you’re building or remodeling, have them frame the wall for 42 inches, and see how you like it.
How thick is a plaster wall?
Plaster over concrete or masonry is referred to as a maximum thickness. Without lath, the maximum is 5/8-inch for walls and 1/8-inch for ceilings. Plaster may be applied thicker, if lath is used.
How thick is a wall cm?
The standard values of non-load-bearing walls are usually 11.5 cm. However, it is also possible to build them only 5.2 cm or 7.1 cm thick.
What depth is plasterboard?
There are two standard thicknesses of plasterboard – 9.5 mm and 12.5 mm. Plasterboard sizes for walls are 12.5mm or 13mm. It’s a great noise insulator and can reduce disturbance from other activities. You can use it in bedrooms, nurseries, home offices etc.