Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
How do you fix a Whirlpool refrigerator that is not cooling?
A Whirlpool refrigerator not cooling may have a dirty or damaged gasket that leaks cold air, warming the refrigerator’s interior. Inspect the door gasket for damage, using a cloth dipped in warm water to clean away any dirt and debris. If the gasket is ripped or broken it will need to be professionally replaced.
Why is my refrigerator running but not cooling?
Frozen Evaporator Coils
The most common reason why a refrigerator is not cooling is a problem with the evaporator coils. Over time, evaporator coils can become covered with ice, which prevents the coils from working properly. If the coils are covered in ice, the ice will need to be defrosted to fix the problem.
How do I reset my Whirlpool refrigerator?
- Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
- Power unit up by turning on the circuit breaker(s) or plugging the product back in.
- Ensure the cooling function is turned on.
- Test the control panel functionality.
Why is my Whirlpool fridge not cooling but freezer works?
When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. This motor powers the fan that blows cold air over the refrigerator coils. Without this fan refrigerant won’t cool enough to maintain the refrigerator’s temperature.
Some Whirlpool refrigerators allow a soft reset. If your Whirlpool refrigerator is not functioning correctly, locate the door switches inside the refrigerator. Once you find them, press and release them. The fridge display will temporarily go blank and then kick back into normal operation.
How do you clean the coils on a Whirlpool refrigerator?
Why is my fridge warm but my freezer cold?
The most common cause for this condition is a problem with the defrost system. If the refrigerator freezer is cold but the refrigerator is warm, the evaporator fan motor might have failed. Every refrigerator has a set of coils called an evaporator. These are the coils that get cold.
Why has my fridge gone warm?
Refrigerator Is Too Full
If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm. It’s fairly common for a refrigerator to feel warm if it’s overstuffed, and this problem is obviously easy to resolve.
Can you reset a refrigerator by unplugging it?
Unplug your refrigerator
Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that’s normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won’t work.
Why is my Whirlpool freezer not freezing?
The most common cause for this condition is a problem with the defrost system. The defrost heater turns on several times throughout the day to melt away any frost that may have accumulated on the freezer evaporator coils. … If the defrost heater does not have continuity, replace it.
How long do Whirlpool fridges last?
Depending on model and size, a properly maintained refrigerator can last between 14 and 17 years. A standard refrigerator can run up to 17 years on average, while a compact refrigerator can run for 14 years.
How do I put my Whirlpool refrigerator in diagnostic mode?
https://youtube.com/watch?v=7jlunGMqAG4
Where is compressor in fridge?
Where It’s Located: The compressor is located behind your fridge and at the bottom. It is a black, tank-like part. The compressor start relay is the part that feeds the cords into the compressor. You will need to pull your fridge away from the wall to access both parts.
How do I make my refrigerator colder?
On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.
How do I reset my refrigerator compressor?
- Step 1: Move the Refrigerator out from the Wall. …
- Step 2: Unplug the Refrigerator. …
- Step 3: Shut off the Control Panel. …
- Step 4: Plug the Refrigerator Back In. …
- Step 5: Reset the Temperature Settings. …
- Step 6: Move Your Refrigerator Back into Place. …
- Step 7: Wait at Least 24 Hours.
Where is the evaporator coil located in a Whirlpool refrigerator?
Where is the condenser coil located on a refrigerator?
The condenser coils are located either under the refrigerator behind the base grille, on the back of the refrigerator or on the top of the refrigerator. To minimize the possibility of electric shock, always unplug the refrigerator from the power supply before attempting any maintenance or cleaning.
How often should refrigerator coils be cleaned?
It’s recommended that you clean condenser coils every 6 months to avoid these outcomes and ensure that your refrigerator runs optimally. You may have to clean them more often if pets in the home create extra dander and dirt.
How much does it cost to fix a refrigerator that is not cooling?
Ultimately, people can end up paying anywhere between $40 to $1,000. Keep in mind that the pricier repairs are not commonly done since most people will decide they are not worth it. The average low cost for a refrigerator repair is about $200, while the average high cost is around $1,000.
How much does it cost to replace an evaporator fan in a refrigerator?
Part | Replacement Cost (Labor Included) |
---|---|
Fan | $120 – $150 |
Evaporator Coil | $200 – $300 |
Ice Maker | $350 – $500 |
Fridge Door | $500 – $700 |
Where is the evaporator fan located?
Evaporator fan motors are normally located at the back of the freezer or refrigerator compartment behind one or more panels. You will usually need to remove all of the shelving and drawers to access a rear panel.
Where is thermostat in fridge?
Thermostats are typically found inside the refrigerator and have a knob that allows users to adjust the temperature setting.
How do I fix my hot fridge?
How do you diagnose a refrigerator problem?
- Check the temperature setting.
- Assure that there is enough room for air flow in the refrigerator or freezer.
- Check for air flow restrictions in vents.
- Test the temperature control.
- Clean the condensor coils.
- Check the door seals.
- Test the door switch.
- Test the defrost heater.
What is the first thing to check when refrigerator stops working?
If Your Fridge Has Stopped and the Light is Off
As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
How long do I unplug my fridge to reset it?
Usually I would unplug it for about 5 minutes. This lets the refrigerant pressures in the system to equalize. It should also give the electronics time to reset.
How do you know if your fridge is dying?
- Food is going bad too quickly. …
- Condensation appears on the outside of the fridge. …
- Excess frost. …
- Your refrigerator is super noisy. …
- Your refrigerator never makes any noise. …
- The coils feel too hot. …
- Cracks in the shell. …
- The refrigerator is over ten years old.
Is Samsung or Whirlpool better?
Features | Samsung | Whirlpool |
---|---|---|
Capacity | 253 liters | 265 liters |
Energy rating | 3 star, high efficiency | 4-star rating in 2019 BEE rating and a 3-star rating in 2022 BEE |
What happens when fridge compressor goes out?
A refrigerator’s compressor is the heart of its cooling system, but what exactly happens when a compressor is going out in a refrigerator? … When one element of this system fails or operates at a lower efficiency, the compressor works harder to make up for it, which wears it down quicker.
How do I test a Whirlpool refrigerator compressor?
How much does a Whirlpool refrigerator compressor cost?
Repairing the compressor in an old fridge may cost more than half of the refrigerator’s purchase price. Conversely, it may cost you between $500 to $1,000 to repair or replace the compressor in a recent Whirlpool refrigerator model.
What are the signs of a bad refrigerator compressor?
You’ll know that your compressor is bad when it starts making abnormal noises, the compressor overheats or not providing proper cooling, or when the fridge compressor clicks on and off too frequently.
How do you know if your refrigerator compressor is bad?
Pay attention for half an hour. If you do not hear it, then there is an issue. If you do hear the compressor working but your fridge is not cold, or you hear it running constantly without shutting off, then it is likely there is an issue with the compressor as well.
How do you clean refrigerator coils?