- Turn the ignition switch to the On position but do not crank the engine.
- Press the odometer button until the total mileage shows on the display.
- Turn the ignition switch off.
- Press and hold the odometer button. Turn the ignition on again.
How do I turn off the maintenance required light on my Toyota Highlander?
- Turn the ignition switch to the On position but do not crank the engine.
- Press the odometer button until the total mileage shows on the display.
- Turn the ignition switch off.
- Press and hold the odometer button. Turn the ignition on again.
How do you reset the maintenance required light on a Toyota Highlander 2019?
https://www.youtube.com/embed/BkIkhT7-9Dc
How do I turn off the maintenance required light on my Toyota?
Push and hold the trip meter reset button on the dashboard, then turn your key to the second position. Continue to hold the odometer button for 10 seconds total. This should cause the light to flash, possibly beep, then turn off. After it’s off, release the odometer button then start the car.
How do I turn off the maintenance required light?
https://www.youtube.com/embed/Sx8d60sQIJA
How do you reset the maintenance required light on a 2010 Toyota Highlander?
https://www.youtube.com/embed/KkovrMBHNcY
How do you reset the oil maintenance light on a 2016 Toyota Highlander?
https://www.youtube.com/embed/yZ6TGEWk2tc
How do you turn off the maintenance required light on a Toyota Highlander 2021?
- Turn on your car without starting the engine. …
- Go to the ⚙️ Settings. …
- Find the VEHICLE SETTINGS menu. …
- Press and hold the OK button. …
- Select SCHEDULED MAINTENANCE or OIL MAINTENANCE. …
- Select YES.
How do you reset the maintenance light on a 2017 Toyota Highlander?
Hold down the odometer button while pressing the push to start button twice. Continue holding the odometer button until the screen clears, which will reset Your maintenance light.
How do you reset the maintenance light on a 2004 Toyota Highlander?
https://www.youtube.com/embed/gm8fklmQgow
How do you reset the oil maintenance required?
Hold the Reset Button and Turn the Key
Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the maintenance required light on a 2007 Toyota Highlander?
- Turn the ignition to the on position without turning on the engine.
- Press the odometer button until the display shows the total mileage.
- Turn the ignition off.
- Press and hold the odometer button while you turn the ignition back on.
- Your maintenance light should blink a few times, then turn off.
How do you reset the maintenance required light on a 2005 Toyota Highlander?
https://www.youtube.com/embed/Cld7r71Acsg
How do you reset the maintenance light on a Toyota 2020?
https://www.youtube.com/embed/2EXzwhrbwIs
How do you reset the oil change light on a Toyota Highlander?
Briefly click the odometer knob until you see trip a â». Next, press the off ignition and hold the reset trip odometer button, and turn the ignition switch to on position. Continue holding down the reset trip odometer button until the display shows 000000 miles, and the maintenance light turns off.
What does it mean when maintenance required light is on Toyota?
The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.
How do you reset the maintenance required light on a Toyota Tacoma?
- Press the “Power” button once without holding the brake to activate the electronics. …
- Use the Left and Right arrows to select the “Gear” …
- Use the Up and Down arrows to select “Settings“, then press .
- Use the arrows to select “Maintenance Reset“, then press .
- Select “Yes“, then press .
How do I turn off the maintenance required light on my Toyota Camry?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.